ONLINE STORE CATEGORIES

Focus Mk1 1998-2004 incl. ST & RS Focus Mk2 ST225 2006-2010 Focus RS Mk2 2009-2010 Focus Mk3 ST250 & Zetec S 2012-present Focus RS Mk3 2016-present Fiesta Mk2 & Mk3 incl. XR2, XR2i, RS Turbo & RS1800 Fiesta Mk4/5 and Mk6 incl. Zetec-S & ST Fiesta Mk7 ST180 EcoBoost, Zetec & 1.0 EcoBoost Mustang 2015 2.3 EcoBoost & V8 Cosworth models incl. Sierra, Sapphire & Escort Escort Mk1 & Mk2 (old skool section) Escort Mk3 & Mk4 incl. RS Turbo & XR3i Escort Mk5 & Mk6 RS2000, GTi & XR3i 16v Mondeo Mk3, Mk4 & S-Max Transit - Commercial AIRTEC COOLING SOLUTIONS - ALL MAKES PRO HOSES - PRO SILICONE HOSES Revo Hardware AUTOSPECIALISTS REMAPS EIBACH - PERFORMANCE SPRINGS XTREME CLUTCH - PERFORMANCE CLUTCH SYSTEM TURBOSMART - ACTUATORS, DUMP VALVES & RECIRC VALVES MAXTON DESIGN - Splitters, Spoiler Extensions, Bumpers CLOTHING MERCHANDISE Paypal Sagepay

NEWS & UPDATES

Rolling tested!! Airtec stage2 intercooler tested on 650bhp Focus RS Mk2
Rolling tested!! Airtec stage2 intercooler tested on 650bhp Focus RS Mk2
AS Performance Inlet manifolds available from stock
AS Performance Inlet manifolds available from stock
In stock Fiesta Mk7 ST180 Weitec coil over kit - Free fitting until end of November 2013
In stock Fiesta Mk7 ST180 Weitec coil over kit - Free fitting until end of November 2013

EMAIL OFFERS


Visitors By Appointment only - call 01375 371449
AUTOSPECIALISTS LTD
UNIT 52 GLOBE INDUSTRIAL ESTATE
TOWERS ROAD
GRAYS
ESSEX
RM17 6ST

We accept all major debit & credit cards

card logos

AIRTEC Stage 4 - 300bhp to 445bhp - Intercooler RS Spec with ST Size Scoop & 2.5-inch Boost Pipes

< Back

ADDITIONAL IMAGES

           

 

Designed & Proven to extract maximum gains from your 300+ bhp ST, this kit would compliment the DreamScience Turbo X upgrade or a similar Big Turbo conversion.
 
Our RS into ST Performance & Cooling kit has been Rolling road tested (tests caried out @ AMD Essex)
 
2.5" Hard pipe upgrade removes fords 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase's over the standard ford pipes, these gains were achieved by simply bolting on the big AS 2.5" Boost pipe kit!  (these are RS figures, ST gains to be publised soon) Gains will vary depending on spec of your ST
 
Intercooler spec.
  1. Air-Ram Scoop, forces Air directly into core of intercooler
  2. Huge high flow 60mm core, lower ACT Temps, 
  3. Smooth flow end tanks, no welds, means no leaks
  4. Airtec logo brackets
  5. Increased BHP & torque Figure
  6. Pro-Series Black
  7. Strongest Intercooler available, backed up by our 3 year warranty. 
  8. All Pipe's have swayed ends to stop the pipes blowing off

Fitting takes 1 - 2 hours depending on mechanical skill & tools available

Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)

 
Important Note. The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand pipe (Inlet side) very tight against the radiator cradle & boost hose, we recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replace bolt. Its very simple and Easy to do, but is necessary to give you extra clearance for the bigger 2.5" pipe, if you are still not happy with fit we would recommend fitting a RS radiator, not required to get the power you want, just makes cold side hose fit nicer.
 

AIRTEC part number: ATINT34/BBP

Was: 694.00
Now: 649.00

Qty:  

 

Intake pipe - cold side


Silicone Hose Colour











AIRTEC Logo











Intercooler Finish: